XSN series intelligent counter

Có thể đàm phánCập nhật vào05/18

Mô hình

Thiên nhiên của nhà sản xuất: Nhà sản xuất

Danh mục sản phẩm

Nơi xuất xứ

Tư vấn trực tuyến

Tổng quan

The XSN series intelligent counter can be paired with various photoelectric switches, proximity switches, grating rulers, incremental rotary encoders, and other pulse output sensors to achieve counting; Measure displacement and length; Measure the angle. Single phase pulse or biphasic orthogonal pulse input, with a maximum counting frequency of 10kHz. The counting ratio can be set within a wide range of 0.0001 to 45.000. 2-point preset output. Two output modes, with the ability to set delay recovery and automatic reset functions. It can achieve range alarm and automatic quantitative (fixed length) control. Welcome to consult with all users.

Chi tiết sản phẩm

XSN系列智能计数器

XSN series intelligent counterCan be equipped with various photoelectric switches, proximity switches, grating rulers, incremental rotary encoders and other pulse output sensors for counting purposes; Measure displacement and length; Measure the angle. Single phase pulse or biphasic orthogonal pulse input, with a maximum counting frequency of 10kHz. The counting ratio can be set within a wide range of 0.0001 to 45.000. 2-point preset output. Two output modes, with the ability to set delay recovery and automatic reset functions. It can achieve range alarm and automatic quantitative (fixed length) control. Welcome to consult with all users.

Basic specifications

project		specification
power supply voltage	ACpower supply	100~240 V AC 50/60 Hz
	AC/DCpower supply	10~24V AC 50/60 Hz；10~24V DC
power consumption	ACpower supply	7 VAbelow
	AC/DCpower supply	AC：6 VAfollowing;DC：5Wbelow
Allowable voltage variation range		The voltage of the power supply90%~110%
insulation resistance		≥100MΩ（500V DC MEGABenchmark)
insulation strength		2000V AC (Test conditions:50/60Hz，1Minutes)
anti-interference		IEC61000-4-2(Electrostatic discharge))Grade III IEC61000-4-4(Electric Fast Transient Pulse Group), Level III IEC61000-4-5(Surge), Level III
Protection level		IP65(Product front panel protection)（GB/T42-2008）
runtime environment	ambient temperature	-10~55℃(Save:-25~65℃）
	ambient humidity	35~85 %R•HNo condensation
	Installation location	Indoor, height<2000m

XSNSeries intelligent counterInput specifications

project			specification
Input signal type			Pulse input
Type of input signal	Single-phase pulse （20mAAbove)	1	Applicable toNPNThePNPTheOCGate voltage pulse,2thread system4~20mApulseTTLPulse, etc. signal amplitude1V~30VUniversal.
	Biphasic orthogonal pulse	2	Applicable toNPNThePNPTheOCGate voltage pulse, signal amplitude3V~24V
	10HzThe following single-phase pulse input	D	Suitable for low-speed counting to prevent input signal jitter.
Maximum counting frequency			10kHz
display range	5Position display instrument		-19999~45000The decimal point position can be set.
	7Position display instrument		-9999999~9999999The decimal point position can be set.

★ The input specifications are determined according to the needs, based on the model number4Partial representation.

■ Optional specifications

project		specification
Preset output	T1~T2	1~2Point relay preset output,250V AC/3A， resistive load
Analog output (Limited)5Position display instrument	A1	current output(4~20)mAThe(0~10)mAThe(0~20)mA			opto-isolation Resolution:1/3000 Load capacity:600Ω
	A2	voltage output(1~5)VThe(0~5)V
	A3	voltage output(0~10)V
	A4	Voltage output（-5V~+5V）
	A5	Voltage output（-10V~+10V）
external control	K1	zero clearing	Signal width greater than20msPassive switch or voltage control When controlled by a passive switch, closure is effective and disconnection is ineffective During voltage control,4VThe above is valid,1VThe following is invalid, load current>4mA
	K2	Reset, add/reduce
	K3	Reset, add/Reduce and lock
communication interface	S1	RS232Interface,TC ASCIIagreement		opto-isolation Speed:2400、4800、 9600The19200 bps Address:0~99 Response time:500μS(Measurement value)
	S2	RS485Interface,TC ASCIIagreement
	M1	RS232Interface,Modbus-RTUagreement
	M2	RS485Interface,Modbus-RTUagreement
external power supply	B1	24V±5%，50mAbelow
	B2	12V±5%，50mAbelow
	B3	5V±5%，50mAbelow
Printing interface	P	Hardware clock
Counting ratio method	C1	Single count ratio method
	C2	Multiple Count Ratio Method (Limited)5Position display instrument）

Sản phẩm tương tự Khuyến nghị