Mitsubishi Heavy Industries Worm Gear Reducer SEHV160R-100

Mitsubishi Heavy Industries Worm Gear ReducerSEHV160R-100：

Shanghai Lingyouhui Technology Co., Ltd. is the agent of Mitsubishi Heavy Industries Hasegawa Co., Ltd. MHI HASEG CO., LTD in China and globally. Please feel free to inquire.

Mitsubishi Heavy Industries reducers are divided into single-stage reducers, two-stage reducers with helical gears, and two-stage reducers. They can be divided into hollow shaft and solid shaft based on the shaft output method. Hollow shaft speed ratio 5-50 single-stage reducer model numbers SUHA, SHVA, SOHA, two-stage reducer with helical gear speed ratio 63-250 models include SEUA, SEHA, SEOA, two-stage worm gear reducer speed ratio 315-1600 models include SCUA, SCHA, SCOA; Solid shaft base installation: Single stage speed ratios of 5-50 models include SUHW, SHVW, SOHW, and two-stage helical gear reducers with speed ratios of 63-250 models include SEUH, SEHV, and SEOH; The two-stage reducer models with a speed ratio of 315-1600 include SCUH, SCHV, and SCOH.

Mitsubishi Heavy Industries Worm Gear ReducerSEHV160R-100：

MHI HASEG CO., LTD. is a member of Mitsubishi Heavy Industries Group, and Shanghai Lingyouhui Technology Co., Ltd. has introduced power transmission equipment from Mitsubishi Heavy Industries' power transmission department to China. On April 1, 2015, Mitsubishi Heavy Industries' power transmission department was reorganized into Mitsubishi Heavy Industries Hasegawa Co., Ltd. MHI HASEG CO., LTD., which focuses on the design, development, and production of large gearboxes. The reducer produced by Mitsubishi Heavy Industries Hasegawa MHI HASEG has the characteristics of adjustable backlash, five stage variable speed, stable rotation, low noise and low vibration. Widely used in precision machinery, steel rolling machinery, semiconductor manufacturing equipment, aerospace steel, rubber, printing, textile machinery and other industries.

1. routine maintenance

• Check the oil levelRegularly check the oil level of the gearbox. If the oil level is found to be too low, the lubricating oil should be replenished to the specified level in a timely manner.

• Check temperatureDuring operation, pay attention to observing the temperature changes of the gearbox. If the temperature is found to be too high, the machine should be stopped immediately for inspection, the cause should be identified, and the fault should be eliminated.

• Check for noise and vibrationListen to the sound of the gearbox during operation. Under normal circumstances, it should run smoothly with low noise. If abnormal noise or vibration occurs, it may be caused by gear wear, bearing damage, or loose installation. It is necessary to stop the machine in a timely manner for inspection and maintenance.

• Check the sealing areaCheck if there is any oil leakage at the sealing part of the reducer. If there is oil leakage, the cause should be identified in a timely manner, and the sealing components should be replaced or corresponding sealing measures should be taken.

2. regular maintenance

• Change the engine oilAccording to the user manual and operating conditions of the reducer, regularly replace the lubricating oil.When replacing the lubricating oil, the oil should be drained after the gearbox is stopped, and the oil tank and passage should be cleaned professionally before adding new lubricating oil.

• Check the gears and bearingsRegularly inspect the gears and bearings inside the gearbox. Check the wear of the gears; Check the clearance, rotational flexibility, and wear of the bearings. For gears and bearings with severe wear, they should be replaced in a timely manner.

• Check the connecting components of the gearboxRegularly check the connecting components of the gearbox to ensure that they are securely fastened. If there is any looseness, tighten them in a timely manner. At the same time, check the wear of the coupling and replace the vulnerable parts of the coupling in a timely manner if necessary.

• Clean the gearboxRegularly clean the casing of the gearbox to remove dust, oil stains, and debris from the surface, in order to facilitate heat dissipation and maintenance inspections.