3V210-08W external pilot vacuum valve

3V210-08W external pilot vacuum valveModel meaning:
3V210-08W (3V represents: two position three-way solenoid valve, 2 represents: body is 200 series, 10 represents: dual position single control, 08 represents: pipe diameter is G1/4, W represents: action mode is external pilot type, voltage and wiring mode are optional by the customer; For other voltage specifications (AC380V, AC110V, AC36V, AC24V, DC12), if you need these voltages, please inform customer service:

One Standard specifications:

① Model and Name:3V210-08W external pilot vacuum valve

② Working medium: Air

③ Action mode: Pilot type

④ Connection diameter: intake=exhaust=G1/4

④ Effective cross-sectional area: 16.00mm ² (CV=0.89)

⑤ Number of positions: Two position three-way connector

⑥ Lubrication: No need (if lubrication is added, it cannot be stopped halfway. It is recommended to use ISOVG32 or equivalent lubricating oil)

⑦ Pressure range: 0-0.8MPa

⑧ Guaranteed pressure resistance: 1.5MPa

⑨ Working temperature: -20--70 ° C

⑩ Body material: Aluminum alloy

twoProduct Features

① Leading method: external leading;

② Sliding column structure, good sealing and sensitive response;

③ Internally processed with special techniques, low friction resistance, low starting pressure, and long service life;

④ No need to add lubricating oil;

⑤ Equipped with a manual device for easy installation and debugging;

⑥ There are multiple voltage levels to choose from;

⑦ Can be integrated with the base valve group to save installation space.

Three electrical performance parameters:

① Standard voltages include: AC220V, AC110V, AC36V, AC24V, DC24V, DC12V

② Voltage range: AC: ± 15% DC: ± 10%

③ Power consumption: AC: 6VA DC: 4.8W

④ Protection level: IP65

⑤ Heat resistance level: B level

⑥ Power connection type: socket type and outlet type are optional

⑦ Excitation time: less than 0.05 seconds

⑧ High action frequency: 5 times/second

The three symbols represent meanings:

3V210-08W (3V represents: two position three-way solenoid valve, 2 represents: body is 200 series, 10 represents: dual position single control, 08 represents: pipe diameter is G1/4, W represents: action mode is external guidance, voltage and wiring mode are optional by the customer;

Four ordering instructions:

① Please indicate the product name, order number, specifications, quantity, etc. when placing an order.
② When ordering solenoid valves, please specify the voltage and specifications (AC, DC) of the solenoid valve.
③ Two position three-way valves are described as normally closed. If normally open is required, please place an order.
④ If there are special requirements, please come and write to us to explain, and both parties can negotiate to resolve them.

Installation and use of 3V210-08R

1. Before use, pay attention to checking whether the components have been damaged during transportation, and then install and use them
2. During installation, please pay attention to the direction of gas flow (note the "→" direction) and whether the tooth shape of the connecting pipe is correct. The medium used must be filtered through a 40um filter cartridge.
3. Please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "operating temperature range", etc.), and then install and use it
4. Try to avoid using in a vibrating environment and pay attention to anti freezing measures at low temperatures
5. When connecting the main pipeline, be careful not to wrap the anti leakage belt beyond the end face of the joint teeth, and pay attention to removing dust, iron filings, and other dirt inside the pipeline joint
6. During installation, first press the base gasket into the base, then connect the base to the valve body with the provided screws. For installation positions that are not currently in use, press in the base gasket and seal it with the attached blind cover. When the system is expanded, remove the blind cover and install it into the corresponding solenoid valve
7. Please pay attention to dust prevention. When not in use, dust covers should be installed at the inlet and outlet.

Regarding packaging and after-sales service:

1. All regular products (non customized, non-standard) are guaranteed to be shipped within two days after the payment is received. If there are special circumstances, we will communicate with the customer in a timely manner; Ensure that it does not affect customer usage;

2. The product has its own brand packaging (EST/EST) and neutral packaging, and can also be packaged as the customer's own brand according to their requirements (brand certificate must be provided). Generally, products are labeled, but if the customer requests laser treatment, we can also apply laser treatment;

3. If customers have any questions they do not understand during use or installation, they can always contact our technical personnel and provide a face-to-face response;

4. The product comes with a one-year warranty. If any problems arise during normal use within one year, we will provide free repairs for the customer.